Pleated Filters

Standard Pleated Panel

ISO 16890 Filter Class ISO Coarse 70% G4 Efficiency EN779:2012

The Filterite Pleated Panel range are fully tested and compliant with ISO16890. Manufactured from a fully synthetic polyester material, laminated to a wire support grid and enclosed in a rigid waxed board outer frame to offer maximum strength and support.

A finger separator is inserted into the 100mm filter to aid pleat stability. It offers a consistent performance as a pre-filter and provides a medium level of filtration efficiency in air conditioning systems to a wide range of applications.

View Datasheet
standard-pleated-panels-circle

HC Pleated Panel

ISO 16890 Filter Class ISO Coarse 70% G4 Efficiency EN779:2012

The Filterite Pleated Panel range are fully tested and compliant with ISO16890.

Offering approx. 40% more filter media than our standard pleated panels the HC panel offers greater dust holding capacity along with extended filter life.

Manufactured from a fully synthetic polyester material, laminated to a wire support grid and enclosed in a rigid waxed board outer frame to offer maximum strength and support. A finger separator is inserted into the 100mm filter to aid pleat stability.

View Datasheet
standard-pleated-panels-circle

Odourpleat Carbon Pleated Panel

Designed to remove odours and low gaseous contaminants, the Odourpleat Carbon Pleated Panel helps to improve Indoor Air Quality in a wide variety of applications.

Manufactured from a synthetic non-woven synthetic media impregnated with carbon, laminated to a wire support grid and enclosed in a rigid waxed board outer frame to offer maximum strength and support.

A finger separator is inserted into the 100mm filter to aid pleat stability.

View Datasheet
odourpleat-carbon-pleated-filters

HC Self Supporting Pleated Panel

ISO 16890 Filter Class ISO Coarse 60% G4 Efficiency EN779:2012

A new addition to our range is the High Capacity Self Supporting (HCSS) Pleated Panel.

Offering consistent performance levels whilst providing high indoor air quality, the design of the new HCSS with its thermally set self-supporting pleats, means increased filter life cycles and reduced maintenance costs can be achieved.

With over 95% more filter media than a conventional pleated panel and a uniformed pleat configuration a greater dust holding capacity is achieved which in turn creates a longer service life, hence saving energy and money Ideally suited for high moisture content installations.

View Datasheet
standard-pleated-panels-circle

Bag Filters

Hi Loft Bag Filter

The Filterite range of High Loft Bag Filters are manufactured using thermally bonded non-shedding synthetic polyester media which are shatter proof, Oeko-Tex 100 approved which means it is free from harmful allergens.

With heat sealed joints that create rigid self supporting pockets offering a high dust holding capacity. Pockets are fully sealed into galvanised steel header retainer frame.

Environmentally friendly being totally incinerable High humidity resistant up to 100%

Fire Retardant to DIN 53438-3 (F1)

View Datasheet
hi-loft-bag

High Efficiency Bag Filter

Available in a wide range of filter efficiencies to suit each application the High Efficiency Bag Filter offers great filtration performance at affordable pricing.

Manufactured from Oeko-Tex 100 approved synthetic media (which is free from harmful substances like glass fibres) and formed into heat seemed sealed pockets and enclosed in a galvanised steel header frame.

It offers a high dust holding capacity with low initial pressure losses to ensure maximum filter life cycles are achieved. Widely used in many environments.

View Datasheet
high-efficiency-bag-filter

Rigid Filters

Rigid Compact Filter

ISO 16890 Tested    EN779:2012 Grades M6 – F9

A Rigid compact filter designed to offer a high airflow capacity within a minimum depth ratio. Can be used as an alternative to bag filters without any modifications to the system.

Outer frame manufactured from a sturdy polypropylene casing. High quality paper filter packs are supported by continuous thermoplastic separators to ensure full rigidity.

The V formed design offers a large filter surface area and dust holding capacity to provide significantly greater filter life. Suitable for high humidity up to 100%.

Fully incinerable.

View Datasheet
rigid-compactfilters

HEPA Filters

Hepa Filters

Our range of HEPA (High Efficiency Particulate Air) filters are designed to offer the superior indoor air quality required by many clean room environments.

Manufactured to the highest standards and tested all of our HEPA filters come with a test certificate detailing the performance level.

Manufactured from microfine glass paper media and fully sealed into a housing case which has a one piece polyurethane gasket seal.

View Datasheet
hepafilters

Carbon Filters

Discarb Carbon Panel

The galvanised cased Discarb panels are designed to remove unwanted odours and hazardous substances from the supply, extract and recirculated air.

Discarb panels contain bonded carbon cells (minimum 50% CTC rated carbon), sealed into a galvanised sheet metal casing and are available in Standard or Heavy Duty options depending upon the airflow and application.

The advantage of this type of filter is that with the panels sealed into the housing then there is no possibility of any air leakage with the cell. Ideal dwell time 0.1 – 0.2 seconds is recommended depending upon application.

View Datasheet
discarb-carbon-panel

Odourpleat Carbon Pleated Panel

Designed to remove odours and low gaseous contaminants, the Odourpleat Carbon Pleated Panel helps to improve Indoor Air Quality in a wide variety of applications.

Manufactured from a synthetic non-woven synthetic media impregnated with carbon, laminated to a wire support grid and enclosed in a rigid waxed board outer frame to offer maximum strength and support.

A finger separator is inserted into the 100mm filter to aid pleat stability.

View Datasheet
odourpleat-carbon-pleated-filters

Carbon Rigid Compact Filter

The environmentally friendly Activated Carbon Rigid Compact Filter offers a 2 in 1 product using F7 grade mini-pleat media impregnated which approx. 3.5 kg of activated carbon to remove problematic gases and odours and improve indoor air quality.

It can be retrospectively installed into existing filter housings and frames with no major modifications as a retrofit to bag filters and offers a totally rigid construction. Lightweight and easy to handle compared to conventional carbons.

Robust and fully durable and incinerable making them suitable for disposal without going to landfill.

View Datasheet
rigid-carbon-filters

Media Filters

Synthetic Media

A safe environmentally friendly alternative to glass media.

Our range of thermally bonded non-shedding synthetic medias are fully tested to ISO16890 and are perfect for all kinds of applications including pre-filters in air conditioning systems through to specialist paint spraying applications.

Suitable for humidity up to 100%. Oeko-Tex 100 approved media which means it is free from harmful substances and skin irritants. Fully incinerable saving on landfill.

View Datasheet
media-filters

Kitchen Canopy Filters

Kitchen Canopy Grease Filters

High quality manufactured to withstand long lasting cleaning cycles. Designed to ensure high efficiency and low pressure loss.

Sturdy construction enables suitability of dishwasher and pressure washer cleaning. Handles and drain holes are fitted as standard.

View Datasheet
kitchen-canopy-filter